OZONE - THE LATEST ADVANCE IN STERILIZATION OF MEDICAL DEVICES

Authors

  • Lorna Murphy

Abstract

How many times have procedures in your operating rooms been delayed because the instruments needed were still in the sterilizer? As Perioperative nurses you are likely to be quite familiar with the constant pressure to ensure that scarce instrumentation is available when needed.

In 2003, a Canadian company developed a unique sterilization process employing ozone as the sterilizing agent. This technology is a safe, rapid and economical alternative to other low temperature sterilization modalities and may relieve some of the pressure experienced when instruments in short supply are in high demand.

This article will discuss the principles of the sterilizer and the cycle and will explore the advantages of using this sterilization technology.

Author Biography

Lorna Murphy

Lorna Murphy RN, B.Sc.N., Nurse Clinician, TSO3.

References

1. Schönbein, Christian Friedrich. (2004). The Columbia Encyclopedia, 6th ed. New York: Columbia University Press, www.bartleby.com/65/. July 5th 2005.

2. Environmental Protection Agency (EPA) 2005 Terminology Reference System, http://epa.gov

3. Wayne, R. P. (2000). Chemistry of atmosphere. 3rd ed. New York, Oxford University Press. 775 pages.

4. Ozone Air Purification. www.inspiredliving.com/airpurification/ozone

5. Zhou J.F., W.W. Chen, and G.Z. Tong. 2003. Ozone emitted during copying process—a potential cause of pathological oxidative stress and potential oxidative damage in the bodies of operators. Biomedical Environmental Science.; 16(2):95-104.

6. Beard, R. R. (1982). Inorganic compounds of oxygen, nitrogen, and carbon, in Patty’s industrial hygiene and toxicology, vol. 2C. third ed, G. D. Clayton et F. E. Clayton (ed.), John Wiley & Sons, Toronto. p.4067-4139.

7. Rice, R.G. (1999). Ozone in the United States of America —State-of-The-Art. Ozone Science. & Engineering., 21:99-118

8. Larocque, R.L. (1999). Ozone application in Canada a State of the Art Review. Ozone Science. & Engineering., 21:119-125

9. Ozone Water Purification. www.originfalls. com/water_purification_systems

10.Le Paulouë, J. and B, Langlais. 1999. State-of- The-Art Ozonation in France. Ozone Science. & Engineering., 21:152-163

11.FDA. (1993). Guidance on Premarket Notification (510(k)) submissions for Sterilizers intended for use in health care facilities.

12.ANSI/AAMI/ISO. (1999). ISO 14937 Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process

13.Langlais, B., D. A. Reckhow and D. R. Brink (eds). (1991). Ozone in water treatment, application and engineering. Lewis Publishers: Chelsey, Michigan. 569 pages

14.Dufresne, S. M. Chaunet and S. Robitaille. (2004). The 125L Ozone Sterilizer - The sterilization technology for the 21st Century. TSO3. Technical document. 22 pages

15.TSO3. (2005). Operator’s Manual – TSO3 Ozone Sterilizer model 125L.

16.TSO3. (2005). TSO3 Announces Increased capabilities to sterilize lumened surgical instruments CNW Telbec www.cnw.ca/en/re/eases/archive/July 2005

Downloads

Published

2006-06-01

How to Cite

Murphy, L. (2006). OZONE - THE LATEST ADVANCE IN STERILIZATION OF MEDICAL DEVICES. Operating Room Nurses Association of Canada Journal, 24(2). Retrieved from https://ornacjournal.ca/index.php/ornac/article/view/12499

Issue

Section

Feature Articles